WBGT heat stress calculator
Short answerWBGT (wet bulb globe temperature) outdoors in sunlight equals 0.7 times the natural wet bulb, plus 0.2 times the globe temperature, plus 0.1 times the dry bulb. Indoors or without sun it is 0.7 times natural wet bulb plus 0.3 times globe. Compared with screening values for workload and acclimatisation, it shows how much heat strain the work carries.
What the WBGT calculator works out
WBGT combines air temperature, humidity, radiant heat and air movement into one number for how hard it is for the body to lose heat. Humid air in direct sun can be more dangerous than hotter, dry shade.
Enter the three readings in degrees Celsius, choose indoors or outdoors, pick a workload from light to very heavy, and say whether the crew is acclimatised. The calculator returns the WBGT and compares it with heat stress screening values for that workload.
The WBGT formula
Natural wet bulb (NWB) carries 70% of the weight because evaporation of sweat is the body's main cooling route. Globe temperature (GT) captures radiant heat from sun and hot plant. Dry bulb (DB) is ordinary air temperature.
- WBGT (outdoors, sun) = 0.7 x NWB + 0.2 x GT + 0.1 x DB
- WBGT (indoors or no sun) = 0.7 x NWB + 0.3 x GT
Worked example
An outdoor crew on a site: natural wet bulb 27 °C, globe 45 °C, dry bulb 35 °C.
WBGT = 0.7 x 27 + 0.2 x 45 + 0.1 x 35 = 18.9 + 9.0 + 3.5 = 31.4 °C (about 88.5 °F).
Indoors, wet bulb 25 °C and globe 40 °C: 0.7 x 25 + 0.3 x 40 = 29.5 °C.
How to read the result
The number only means something against workload and acclimatisation. ACGIH screening values (2026 edition, as published by CCOHS) give, for moderate work by acclimatised workers: 28.0 °C at 75 to 100% work, 29.0 °C at 50 to 75%, 30.0 °C at 25 to 50% and 31.5 °C at 0 to 25%. For unacclimatised workers the moderate values are 25.0, 26.0, 27.0 and 29.0 °C.
So the outdoor example of 31.4 °C sits under the screening value only in the lowest work band for acclimatised workers, and is above every band for new or returning workers. ACGIH notes the screening table is not meant to prescribe work and rest periods, so a result near or above a value calls for closer assessment and stronger controls.
What the calculation does not tell you
- It applies no clothing adjustment. Coveralls, chemical suits and other heavy PPE add effective heat load and need a correction before comparing.
- It uses one set of readings. OSHA recommends averaging WBGT over 60 minutes, or 60 to 120 minutes for intermittent exposure.
- It assumes healthy, hydrated, rested workers. Illness, medication and poor sleep lower tolerance.
- It does not replace physiological monitoring, a heat stress plan or local rules such as summer midday work bans. Follow site procedures and a competent person.
Questions people ask
How do you calculate WBGT?
Measure natural wet bulb, globe and dry bulb temperatures at the work position. Outdoors in sun, WBGT equals 0.7 times natural wet bulb plus 0.2 times globe plus 0.1 times dry bulb. Indoors or without solar load, use 0.7 times natural wet bulb plus 0.3 times globe. Keep all three readings in the same unit.
What is a dangerous WBGT level?
There is no single number. It depends on workload, acclimatisation and clothing. For acclimatised workers doing moderate work, the ACGIH screening value is 28.0 °C at 75 to 100% work; for unacclimatised workers it is 25.0 °C. Heavy work, PPE and new starters all lower the safe level, so treat any result near the screening value as a warning.
Is WBGT the same as the heat index?
No. The heat index uses air temperature and humidity in the shade. WBGT also includes radiant heat from sun and hot surfaces and the cooling effect of air movement, through the globe and natural wet bulb readings. That makes WBGT the measure used for occupational heat stress screening.
Why does natural wet bulb carry 70% of the weight?
Sweat evaporation is how the body sheds most heat during work. The natural wet bulb shows how much evaporative cooling the air still allows, so it is the strongest driver of heat strain. High humidity raises it and makes the same air temperature far harder to work in.
Can I calculate WBGT in Fahrenheit?
Yes. The weights add up to 1, so the formula gives a valid WBGT in whichever unit you use, as long as all readings are in the same unit. Most published screening values are in Celsius, so convert before comparing. The calculator works in Celsius.
Can I use a weather forecast instead of measurements?
Forecast or estimated WBGT is useful for planning, but it does not replace readings taken where people work. Sun exposure, reflective surfaces, hot equipment and enclosed spaces can make the work position much hotter than the forecast. Measure on site with a WBGT meter when the risk is significant.
Run your own numbers. It works on any phone, and the full guide downloads as a PDF.
Open the free calculator