HSE HUB › Toolbox talks › High-Risk Work
Formwork and Shuttering: Safe Support and Removal
Never remove a prop or load a deck until the engineer gives the green light.
Why this matters
- Concrete is extremely heavy and takes time to reach its full strength. If we remove the formwork or the props too early, the entire slab can collapse. This is one of the most dangerous risks on a construction site.
- Formwork must be built exactly as shown in the design. Every prop, brace, and pin is there for a reason. If one part fails because it was installed incorrectly or removed too soon, the whole system can fail.
Talking points
- Check that every prop is perfectly vertical and locked. A prop that is even slightly tilted cannot carry its full design load.
- Ensure all base plates are on solid ground. Use timber sole boards if the ground is soft. Never place props on loose bricks or rubble.
- Do not stack heavy materials like rebar or bricks on a newly poured deck. The concrete might look hard, but it is not yet strong enough to hold extra weight.
- Never start striking formwork without a written permit or direct order from the supervisor. The engineer must confirm the concrete strength first.
- Follow the correct striking sequence. Removing props in the wrong order can put too much stress on the concrete and cause it to crack.
- Use a safe work platform when installing or removing shuttering at height. Do not climb the formwork itself.
- If you see a prop that is bent, vibrating, or sinking during a pour, tell your foreman immediately.
Ask the crew
- Who is the only person who can authorize the removal of props?
- What should you look for when inspecting a prop before a pour?
- Why is it dangerous to stack steel or blocks on a fresh concrete slab?
Download the PDF with attendance sheet
Daily safety, on WhatsAppA new toolbox talk, safety poster and Question of the Day every day on the HSE HUB channel. Free to follow, and your number stays private.Follow the channelMore high-risk work talks
Safe Handling of Glazing and Facade PanelsPassenger and Material Hoists: Safe Travel and LoadingWorking Safely with Solar PanelsEntanglement: Stay Clear of Rotating PartsPiling Operations: Stay Clear of the RigRebar and Steel Reinforcement Safety
Matching safety poster: Formwork and Shuttering Safety Guide
Tools and study guides
Studying for the ASP or CSP? How to get the CSP · CSP exam blueprint · ASP vs CSP · ASP exam blueprint · ASP practice questions · CSP practice exam · All guides
HSE HUB by NeuraSafe is the app for safety professionals: toolbox talks and posters in six languages, HSE calculators, and with HSE HUB Pro, ASP and CSP practice by exam domain, a full mock exam, animated lessons and Career Prep. See HSE HUB on iPhone, Android and the web.