HSE HUBby NeuraSafe

HSE HUB › ASP certification

ASP certification: how to become an Associate Safety Professional

Short answerThe Associate Safety Professional (ASP) is a credential awarded by the Board of Certified Safety Professionals (BCSP). To qualify you need a bachelor's degree in any field (or an associate degree in safety, health or the environment) and one year of safety, health and environmental experience. You then pass a 5-hour computer-based exam at a Pearson test centre.

Try 10 ASP practice questionsTen questions a day with a full explanation for each. No account needed.

What the ASP shows employers

The ASP is awarded by BCSP, a US-based certification board, and is held by safety practitioners around the world. It signals that you have a qualifying degree, at least a year of professional-level safety, health and environmental (SH&E) work, and that you have passed an exam on the core technical knowledge of the field: hazard control, fire, industrial hygiene, ergonomics, emergency response and the calculations behind them.

Many HSE job adverts list the ASP as preferred, and because it meets the qualified credential requirement for the CSP, it is usually the first BCSP credential people earn.

ASP eligibility requirements

Per BCSP's ASP page, you need both of the following before you can sit the exam.

Unlike the CSP, the ASP does not need a qualified credential first.

ASP exam format

BCSP lists the ASP exam time as 5 hours. The exam is computer-based and delivered at Pearson test centres worldwide, which you book through your BCSP profile. Official results are available as soon as you submit. Once BCSP approves your application you have one year to take and pass the exam, and if you need another attempt you can sit it no earlier than six weeks after your last one.

ASP exam syllabus: blueprint domains and weights

Per BCSP's published ASP11 blueprint (version V.2024.04.24), the exam covers nine domains. The weights tell you roughly how much of the exam each area represents, so they are the best guide to where your study time should go. Our ASP exam blueprint guide explains what each domain covers.

Calculations are only a tenth of the weight on paper, but they also turn up in fire, industrial hygiene and training questions, so a steady calculator routine pays off across the whole exam.

ASP fees and recertification

BCSP's Credentials At-A-Glance sheet lists these ASP fees. Fees change, so confirm them on bcsp.org before you pay.

FeeAmount
Application$160
Exam (one attempt)$350
Application and exam together$494
Exam bundle (two attempts and a self-assessment)$600
Annual renewal$175

To keep the ASP you pay the renewal fee each year and earn 25 recertification points in each five-year cycle. For cycles starting on or after 1 July 2023, 0.5 of those points must come from ethics courses.

From the ASP to the CSP

The ASP is the first qualified credential on BCSP's list for the Certified Safety Professional. Once you hold it and have a bachelor's degree and four years of SH&E experience, you can apply for the CSP, a 5.5-hour exam built around applying safety principles, managing programmes and managing risk. If you hold the ASP through an associate degree, note that the CSP still needs a bachelor's degree. See CSP certification and ASP vs CSP for the full comparison.

How HSE HUB helps you prepare

HSE HUB gives you ASP practice questions by exam domain, weighted to BCSP's published blueprint, with a full explanation for every answer. The 10 free daily questions and the Question of the Day also name their source: the OSHA rule, consensus standard or formula behind the answer. Ten practice questions a day are open to everyone with no account. HSE HUB Pro adds unlimited practice, 25- and 50-question sets, domain drills, a full 200-question mock exam scored by domain, short animated lessons and ASP and CSP study guides.

Important note

HSE HUB is an unofficial study tool and is not affiliated with BCSP. ASP and CSP are BCSP trademarks. Blueprint domains and weights are BCSP's, shown with attribution.

Questions people ask

What is ASP certification?

The Associate Safety Professional (ASP) is a credential awarded by the Board of Certified Safety Professionals (BCSP). It shows that you hold a qualifying degree, have at least one year of professional safety, health and environmental experience and have passed BCSP's ASP exam on core safety knowledge, including a calculations domain.

What are the ASP requirements?

Per BCSP's ASP page you need a bachelor's degree in any field, or an associate degree in safety, health or the environment that includes at least four courses and 12 semester hours in the domains of the ASP blueprint. You also need one year of SH&E experience, at least half of it preventative, professional-level work.

How long is the ASP exam?

BCSP lists the ASP exam time as 5 hours. It is a computer-based exam taken at a Pearson test centre, and your official result is available as soon as you submit. If you need to retake it, BCSP requires you to wait at least six weeks after your last attempt.

How much does the ASP cost?

BCSP's Credentials At-A-Glance sheet lists a $160 application fee and $350 for one exam, or $494 for the application and exam together. A $600 exam bundle includes two exam attempts and a self-assessment. The annual renewal fee is $175. Fees can change, so confirm them on bcsp.org before paying.

Does the ASP lead to the CSP?

Yes. The ASP is the first credential on BCSP's list of qualified credentials for the Certified Safety Professional (CSP). With the ASP, a bachelor's degree and four years of SH&E experience, you can apply for the CSP exam.

Is HSE HUB affiliated with BCSP?

No. HSE HUB is an unofficial study tool and is not affiliated with BCSP. Its practice questions are written by HSE professionals and weighted to BCSP's published blueprint, with a full explanation for every answer, so you can find weak domains and focus your study time.

Try today's ASP practice questions

Open HSE HUB
Also on iPhone and Android.
Free download: the HSE Formula SheetTRIR, noise dose, TWA, WBGT, fall clearance, sling angles, the NIOSH lifting equation and more, on two pages (PDF).
Download the PDF

Related guides

HSE HUB is an unofficial study tool and is not affiliated with BCSP. ASP and CSP are BCSP trademarks. Facts about eligibility, the exam and fees are summarised from bcsp.org (ASP page and Credentials At-A-Glance, read 11 Nov 2026); check BCSP for the current rules.